How to Make a Hot Tub Out of Your Pickup
For many people, hot tubs seem like a luxury that is hard to afford. Most people go their entire life simply enjoying the spas or hot tubs at a rich friend’s house. Now, thanks to the ingenuity of the South, it is possible that anyone can enjoy a hot tub on their property, for a fraction of the price of a normal hot tub. If you own a pickup truck and a couple of other items (it does not cost much to buy, if you do not have them), you can start celebrating your own parties and very hot tub pickup.
Park the vehicle where you want your portable hot tub to be, as long as it is within a reasonable distance from your home. It should be close enough to a water pipe to go from your house to the truck.
Put the tarp on the bed of the truck. Make sure the fabric does not rip or rip anywhere. The dimensions of the fabric vary with the size of the car. The fabric should be large enough so you can push half down on the bed and still have plenty of canvas hanging over all edges. Make sure there is plenty of fabric inside the bed.
Use the adhesive tape to hold the fabric. Wrap the tape around the outside of the truck crate on numerous occasions. There will be a lot of water inside the sheet and bed of the truck, so be sure to pack tight. Also, be sure to press the side of the fabric cage down between the cabin and the bed, and tape as sure as the rest of the bed. If you made sure that there was a lot of tarp in the bed, you should be ready to fill the bed with water without worrying about the slip of towels on the bed.
Unspool the water hose from your house, place it in the box of the truck and turn the water to full power. Some truck beds will hold more than 300 liters of water, so now would be a good time to do something more productive while waiting for the bed to fill. It might take a few hours.
Prepare another pipe (preferably not the pipe house). You can do this while waiting for the bed to fill. Place one end of the hose in the truck’s exhaust pipe. Use some tape to hold the tube in place. Make sure the air coming out of the exhaust pipe does not go directly into the tube.
Place the other end of the hose on the bed of the truck after you have finished filling it. It is important that you are in a well ventilated area before proceeding to step 7.
Start the engine of the truck. The exhaust fumes entering through the tube will act as creator of the bubble in your new hydromassage truck truck. If you want, you can revolutionize the engine to really get the water gurgling. If you do this, however, you should make sure that there is someone behind the wheel of the truck at all times.